Dayton
DC Electric Motors
DC Electric Motor - Permanent Magnet
|
|
TENV Ball Bearings
Reversible Class B Insulation
Mounting - All Position Face and Base
90 Arm. Volts= (Control Volts input 115AC)
180 Arm. Volts=( Control Volts input230AC) |
See below for DC Controllers |
12/24 Volts DC, TENV |
| Key |
Catalog # |
Leeson
Equivalent |
HP @ |
RPM @ |
Torque
in.-Lbs. |
AMPS |
WGT |
|
| 12VDC |
24VDC |
12VDC |
24VDC |
| A |
3XE19 |
|
1/44 |
1/18 |
1800 |
4300 |
0.81 |
2.4 |
3 lb. |
|
| B |
3XE20 |
M1110006 |
1/20 |
1/9 |
1750 |
4000 |
1.81 |
5.1 |
5 lb. |
|
| C |
4Z144 |
M1120044 |
1/14 |
1/6 |
1750 |
4200 |
2.56 |
6.9 |
7 lb. |
|
| C |
4Z143 |
M1120044 |
1/7 |
1/4 |
1750 |
3900 |
5.63 |
14.0 |
10 lb. |
|
| C |
4Z529 |
M1120046 |
1/6 |
1/3 |
1800 |
4200 |
6.38 |
16.5 |
11 lb. |
|
|
90 Volts DC, TENV* |
| A |
3XE21 |
| 1/53 |
2445 |
0.50 |
0.26 |
|
|
| B |
3XE22 |
M1110003 |
1/27 |
1800 |
1.30 |
.050 |
5 lb. |
|
| C |
4Z141 |
M1120013 |
1/18 |
1800 |
1.95 |
0.75 |
8 lb. |
|
| C |
4Z140 |
M1120027 |
1/8 |
1800 |
4.38 |
1.50 |
10 lb. |
|
| C |
4Z528 |
M1120042 |
1/6 |
1800 |
5.63 |
1.80 |
11 lb. |
|
|
180 Volts DC, TENV* |
| C |
1Z851 |
M1120043 |
1/6 |
1800 |
5.63 |
0.90 |
11 lb. |
|
|
Note: Leeson Equivalent numbers are suggested substitutes. Be sure to check the specs. |
|
(*) Use with proper controller or with other DC rectified power sources matched to voltage
(providing Form Factor does not exceed 1.3) |
|
WGT = Approximate Shipping Pounds
|
|
Recommended Controllers
These are non-reversing controllers
|
 |
For 12VDC - 24VDC - 36VDC Motors
Pulse Width Modulated (PWM), Board,
3.63 inches x 4.25 inches x 1.30 inches
Max amps 3.0, Speed Range 20:1 Max current 10 |
| # 3VU56 Max 1/8hp 12 VDC |
|
| # 3VU55 Max 1/4hp - 1/3hp , 24/36VDC |
|
|
|
|
For 24VDC and 36VDC Motors
Variable Speed Controllers, Chassis
3.70 inches x 7.00 inches x 1.70 inches
Speed Range 30:1, Max 2/3hp @ 24VDC, 1hp @ 36VDC
battery power |
# 5JJ52 Max 1hp, 24/36VDC
use with # 4Z529 @ 24VDC |
|
|
 |
For 90VDC and 180VDC
Variable Speed Controllers, Chassis
2.80 inches x 1.50 inches x 3.30 inches
Max 1/6hp @ 90VDC, 1/3hp @180VCD |
# 5JJ57 Max 1/50-1/3HP, 90/180VDC
Max amps 2.0, Speed Range: 25:1 |
|
|
 |
For 90VDC and 180VDC
Variable Speed Controllers
NEMA 4/12 Enclosure
3.81 inches x 5.50 inches x 3.50 inches
Max amps 3.0, Speed Range 25:1 |
| # 5JJ58 Max 1/50-1/2hp, 90/180VDC |
|
|
