|
NEMA 1 Enclosure |
1.5 hp 115 Volt Single Phase
2 hp 230 Volts Single Phase
2 hp 230 Volts Three Phase
1 hp 460 Volts Three Phase |
Dimensions:
W: 2.25" H: 4.5" D: 4"
Position = Maintained |
|
1.5 hp 115 Volt Single Phase
2 hp 230 Volts Single Phase
2 hp 230 Volts Three Phase
2 hp 460Vvolts Three Phase |
Dimensions:
W: 3.5" H: 5.5" D: 5"
Position = Maintained |
|
2 hp 115 Volts Single Phase
3 hp 230 Volts Single Phase
5 hp 230 Volts Three Phase
7.5 hp 460 Volt Three Phase |
Dimensions:
W: 3.5" H: 5" D: 6.5"
Position = Maintained |
|
|
NEMA 4X Enclosure
Water Tight |
1.5 hp 115 Volt Single Phase
3 hp 230 Volts Single Phase
------------------------------------------------------Stainless steel cover screws, shaft, springs,
switch mounting screws, and corrosion-resistant
plated switch terminal screws. Include two
watertight cable connectors and two decals:Fwd Off Rev/Up Off Down. |
Dimensions:
W: 3.7" H: 4.7" D: 3.1"
Position = Momentary
Operation = Spring Return to Center
Inductive Current 20 Amps
(CW0177860S35) |
|
|
Note: We recommend this control only be installed by
a qualified technician that understands how electric motors are
wired. Motor must have wire leads for connections. If motor only has a
terminal board it will be very difficult to wire the switch. This
installation would most likely require a skilled electric motor
technician. |
