|
All Purpose Ice Machine Pump-Replaces most Pumps
Replacements for: Scotsman, Manitowoc, Ice-O-Matic (Mile High), Crystal Tips, York and Ross Remp, Hertell, Frigidaire |
|
1/30hp Dual Voltage
115/230volts, 1.35/.66 amps., 50/60hz.
RPM 3165, Sealed Ball Bearings
Overall Height 9 3/8"
(Not including top studs)
Five Discharge Adapters: 1/2", 5/8", 3/4", 1", "Y"
Three Impellers: 1.75" dia., 1.955" dia., 2.10" dia.
Check Valve: No
Tubing: No
Safety Switch: No
Bracket or Cup: No
UL or CSA Rating: No
Cord Length: 32"
Thermally Protected Motor
Ship Weight 6 lbs.
Disassembly Procedure: REQUIRED ONLY when
using your existing mounting bracket and/or replacing the impeller, motor
etc.
1. Remove base plate by pressing tabs with thumbs or tapping gently with
plastic mallet.
2. Press impeller against pump stand and remove impeller nut and screw.
4. Remove impeller.
5. Remove thumb nuts and washers.
6. Remove pump stand.
Note: These instructions come with the pump, includes reassembly procedure
We do not have
replacement motors for these ice machine pumps |
 |
