- 24 Hour Circulation
- 48-Frame Proven Design
- Side Discharge for Optimum Flow
- Thread Union Connection for either 1" or 1.5" PVC
- Can also use optional hose barbs
- Delivers 40 GPM
- 1/8 HP, 1725RPM
- AO Smith Electric Motor
- Only 1.3 amps @ 115 volts
- Optional Debris Basket Available
- No Power Cord Supplied
- One Year Manufacture warranty
- Manufactured by Waterway Plastics, Oxnard, California
Made in USA
|
We also have a circulation pump
(center discharge rotated 90°)
complete with cartridge filter, cord
debris basket and equipment base.
Starting at $170.92
Click Here for Details |
|
This unit is ideal for Koi pond use with it's very low
power consumption and near silent operation. A much more industrious
version of the 'Tiny Might' pump. Very similar to The Wave I Pump. Simple
1" or 1.5" PVC connections or choose optional hose adapters. Be sure
to select the correct union. If you have standard 1.5" PVC plumbing select
the union for 1.5". If you have the smaller 1" PVC lines such as are used
with the Tiny Might or Lange pump select the 1" unions. We also have
a union for a 1" hose connection. |
|
Numerous spa manufactures are now using the Iron Might pump
for water circulation. This pump has proven to be much more dependable
then the Tiny Might or Lange circulation pump. |
|
The Iron Might pump is an excellent choice for replacing
your Tiny Might or Lange circulation pump. The small
Tiny Might pump has a high failure rate. Because the pumps operate on a
very low volume of water they are very susceptible to mineral build up
around the seal, which will burn the seal up and damage the motor and
bearings. Yes, we realize this pump is considerably larger and
uses larger supply lines. But if you are tired of continually replacing
the Tiny Might or Lange pump, this is the solution. |
|
Pumps do not come with power cord or switch
Pump Dimensions: Length: 12.5" Height: 8.25: Width: 6.5"
Not Self Priming - Pump head must be below the water level |
Catalog # |
Description - Unions Included |
Cost |
|
Waterway Iron Might 115 Volt
1.6 amps 50/60hz
ship weight 15 lbs.
Model Number: CP-1/15-1N11A
Catalog # 3410030-1E |
with 1.5" Unions (for schedule 40 PVC) |
$145.90 |
|
| with 1" Unions (for schedule 40 PVC |
$145.90 |
|
| With 1" Hose Barb Unions |
$145.90 |
|
Optional 115 Volt power cord installed
8' 14-3 cord, 3-prong plug (# 1FD92) |
$20.00 |
|
Catalog # |
Description |
Cost |
|
Waterway Iron Might 230 Volt
.65 amps 50/60hz
ship weight 15 lbs.
Model Number: CP-1/15-1N22A
Catalog # 3410020-1E |
with 1.5" Unions (for schedule 40 PVC |
$145.90 |
|
| with 1" Unions (for schedule 40 PVC |
$145.90 |
|
| With 1" Hose Barb Unions |
$145.90 |
|
|
Optional Accessories |
1.5" PVC Straight Hose Adapter
Threads into inlet/outlets
Sold in pairs only
Part # 417-6150
Cost $3.00/pair
|
|
|
|
Optional Union with
O-ring
for schedule 40 1.5" PVC
Part # 400-4060
Cost $10.96/Pair |
|
|
|
Optional Union
with O-ring
for schedule 40 1" PVC
Part # 425-2020
Cost $9.96/Pair
|
|
|
Optional Hose Barb Union
with O-ring
for 1" flexible hose
Part # 425-2020HB
Cost $9.96/Pair |
|
|
|
Optional Debris/Leaf Basket
1.5" x 1.5"
Recommend for use as a priming pot if necessary
Part # 310-5400
Cost $34.95 |
|
|
|
|
|
  |
