|
|||||
| ||||||||
Leeson Electric Motors
|
Single Phase Electric Motors |
If you are looking for a speed controllable motor - check this page out
BE SURE TO SCROLL THE ENTIRE PAGE
 |
These electric motors are designed for woodworking equipment such as table saws, planners, etc. Totally enclosed designs prevent motor problems caused by wood dust and shavings. 3/4hp thru 2hp motors have a "manual" reset overload protection button. Keyed Shaft. 115/208-230 volts Reversible |
Catalog # |
Description | AMPS @230V |
WGT | Price | |
| 110108 | 3/4hp 3450RPM 56 Frame 5/8" Shaft, Motor Length 11.31" Dimension Drawing |
5.0 | 29 lb. | $199.15 | |
| 110142 | 1hp 3450RPM 56 Frame 5/8" Shaft, Motor Length 11.81" Dimension Drawing |
6.0 | 31 lb. | $243.85 | |
| 110109 | 1.5hp 3450RPM 56 Frame 5/8" Shaft, Motor Length 12.31" Dimension Drawing |
8.5 | 34 lb. | $335.77 | |
| 110402 | 2hp 3450RPM 56H Frame 5/8" Shaft, Motor Length 13.31" Dimension Drawing |
10.0 | 44 lb. | $391.95 | |
| 120395 | 2hp 3450RPM 145T Frame 115/230volts 7/8" Shaft, Motor Length 13.75" Dimension Drawing |
10.0 | 47 lb. | $395.90 | |
| 120341 | 3hp 3450RPM 145T Frame 230volts 7/8" Shaft, Motor Length 13.75" overloads=none Dimension Drawing |
14.0 | 49 lb. | $406.49 |
|
Motor length includes shaft length |
Contractor's Saw Motors
|
 |
Special Mounting:Motor pivots on rod for belt tensioning. Totally enclosed fan cooled motor produces extra high breakdown torques for maximum cutting power. Has 1Ύ"long shaft, Ύ" diameter with keyway. Added 54" cord to all motors. Motor is normally connected for 230volts from the factory. Please double check motor connection before installation. Cat #'s 120925 & 120997 replace Delta UNISAW motor # 83-621; Cat #'s 120728 & 120998 replace Delta UNISAW motor # 83-651 (3HP). Reversible. No overload protection. |
Catalog # |
Description |
AMPS @230V |
WGT | Price |
|
| 120925 | 1.5hp 3450RPM frame=special 115/230volts Motor Length 12.69" |
10.0 | 47 lb. | $359.94 | |
| 120997 | 2hp 3450RPM frame=special 115/230volts Motor Length 12.69" |
11.0 | 47 lb. | $395.42 | |
| 120728 | 3hp 3450RPM frame=special 230volts Motor Length 13.69" |
16.0 | 55 lb. | $504.62 | |
| 120998 | 4hp 3450RPM frame=special 230volts Motor Length 13.69" |
17.6 | 51 lb. | $526.75 |
WGT = Approximate Shipping Pounds |
Leeson Contractors' Power Tool Motors |
 |
Open Drip-proof double shaft electric motors for woodworking applications. With encapsulated, electronic starting switch and double shielded ball bearings to prevent failures caused by sawdust accumulation. Capacitor start design for high torques and reduced amperage, improved efficiency. Shaft extension each end, with keyway and flat 90° apart for ease of mounting. Useable shaft, each end is 1.5" long by .5" diameter on 48 frames and 1 7/8" long by 5/8" diameter on 56 frame motors. No overload protection. |
Catalog # |
Description |
AMPS @230V |
WGT | Price |
|
| 101781 | 1/2hp 1725RPM 56Z Frame 115/208-230volts Dimensional Drawing |
4.4 | 21 lb. | $239.56 | |
| 101782 | 3/4hp 3450RPM 48Z Frame 115/208-230volts Dimensional Drawing |
4.8 | 27 lb. | $246.30 | |
| 114216 | 1hp 3450RPM 56Z Frame 115/208-230volts Dimensional Drawing |
6.0 | 30 lb. | $257.36 |
WGT = Approximate Shipping Pounds |
Leeson C Face Motors - Single Phase |
|
|
Leeson C-Face, totally enclosed fan cooled motors will replace your existing 3-phase motor. The face mount on either three phase or single phase motors are exactly alike when selecting the same frame. 56C has a 5/8" keyed shaft. 143TC and 145TC have a 7/8" keyed shaft. 184TC has a 1 1/8" keyed shaft. No rigid base, Reversible. |
Catalog # |
Description |
AMPS @230V |
WGT | Price |
|
| 110416 | 1hp 3450RPM 56C Frame 115/208-230 volts Dimensional Drawing |
6.0 | 31 lb. | $231.39 | |
| 110419 | 1.5hp 3450RPM 56C Frame 115/208-230 volts Dimensional Drawing |
8.5 | 34 lb. | $297.29 | |
| 120101 | 1.5hp 3450RPM 143TC Frame 115/208-230 volts Dimensional Drawing |
8.5 | 39 lb. | $336.25 | |
| 110422 | 2hp 3450RPM 56C Frame 115/208-230 volts Dimensional Drawing |
10.0 | 43 lb. | $378.42 | |
| 120102 | 2hp 3450RPM 145TC Frame 115/208-230 volts Dimensional Drawing |
10.0 | 46 lb. | $392.54 | |
| 120824 | 3hp 3450RPM 145TC Frame 230volts Manual Overloads Dimensional Drawing |
14.0 | 49 lb. | $439.20 | |
| 131778 | 5hp 3450RPM 184TC Frame 208-230 volts Dimensional Drawing |
19.8 | 84 lb. | $699.98 |
WGT = Approximate Shipping Pounds |
For electric motors of different HP, RPM, enclosure, voltage etc.
See our Single Phase Menu or Three Phase Menu
|
© 1999-2011
All rights reserved Winans Inc.
|
